SPEED HUMPS
|
|
|
|
What are Speed Humps?
Speed Humps prevent speeding in certain road sections that require slow driving speeds, and restrict the entrance of cars to residential areas or school districts.
Where should Speed Humps be installed?
1. In places that require cars to reduce speed, e.g., near schools, kindergartens, children’s playgrounds, neighborhood parks, and secondary roads.
2. On roads that do not differentiate between sidewalks and driveways, and where there is an increased danger of traffic accidents because there are many pedestrians or children playing.
3. Near housing complexes, neighborhood shopping facilities, schools, hospitals, and religious facilities that have many passing cars and require speed restrictions.
4. Near the parking lot entrances of apartments, shopping centers, and large buildings.
|
|
|
|
Each 500mm section comes with two cats eyes which light up at night time and have a 30mm base channel to allow for cabling and plumbing. Each 500mm module has four fastening holes of 14mm, two of which are slotted by 55mm. End caps have two fastening holes of 14mm. This speed hump is suitable for use in confined areas of covered and multi level car Parks, commercial premises, petrol stations etc, anywhere that you wish to further check the speed of vehicles travelling at 30km/h or less.
|
 |
Superior pressure moulded rubber
-
Superior construction ensures speed humps and end caps will not warp, crack, chip or rot.
-
Easy handling and storage, removable and relocatable,
-
500mm sections in moulded colours of black and yellow.
-
Standard length and uniform size allow product to be abutted together to create varying lengths and colour choice.
-
Channeled bottom (28mm channel) allows for drainage and covers cabling and piping for public safety
-
Resistant to ultraviolet light, moisture, oil and extreme temperature variations.
-
New surface ribbing reduces wheel slippage.
-
Slotted fastening channels allow for joint movement.
-
Flexibility design allows conformity to contour of virtually any road surface.
-
Contributes to a safer environment-reduces speed.
-
5 year guarantee
- This speed hump complies with the new Australian /New Zealand standard AS/NZS 2890.1:2004.
|
Specifications
|
Part No |
Stlye |
Modules
Length.......... 500mm
Width............ 420mm
Height.......... 55mm
Weight.......... 11kg
|
SH500Y
SH500B |
500mm yellow module
500mm black module |
End Caps
Length...........320mm
Width.............420mm
Height............55mm
Weight ..........5kg
|
SHEC 320Y
SHEC 320B |
320mm yellow end cap
320mm black end cap |
Spikes
Length...........M12x250
|
Road Spike 250
Screw bolt 75 |
Fixing for Asphalt
Fixings for Concrete
|
| |
|
|
 |
Manufactured from recycled rubber, the economy speed hump is the ideal quick fix to control excessive speed on your site. Each 250mm module comes with four “cat’s eyes” and two fixing points. This Speed Hump is suitable for use in confined areas such as outdoor and multi-level car parks, commercial premises, petrol stations etc, anywhere that you want to further check the speed of vehicles travelling at 30km/h or less.
High visibility.
Embedded reflective small light.
Modular sections — span any width required to desired length.
Long lasting yellow rubber with added UV protection for colour stability.
This speed hump complies with the new Australian / New Zealand standard AS/NZS 2890.1:2004.
Designed for high traffic volume.
|
Specifications
|
Part No |
Style |
Length 250mm
Height 50mm at max
Width 350mm
Weight 4kg
|
ESH217B
ESH217Y
EEC217B
EEC217Y
ROAD SPIKE 250
SCREW BOLT 75 |
250mm Black Module
250mm Yellow Module
250mm Black End Cap
250mm Yellow End Cap
250mm Road Spike
75mm Screw Bolt
|
| |
ECONOMY SPEED HUMP 1000
|
|
|
Built-in "Cat Eye" reflector.
12mm fixing points.
This speed hump complies with
the new Australian / New Zealand
standard AS/NZS 2890.1:2004. |
Specifications
|
Part No |
Style |
Length.......... 1000mm
Height.......... 50mm
Width............350mm
Weight.......... 15kg
|
ESH 1000
EECY
EECB
Road Spike 250
Screw Bolt 75
|
Speed Hump 1000 x 350 module
End Cap Yellow 250 x 350
End Cap Black 250 x 350
250mm Road Spyke
75mm Screw Bolt
|
| |
75mm AGGRESSIVE SPEED HUMP MODEL DH-SP-8
|
|
 |
Specifications
|
Part No
|
Style
|
Length.......... 500mm
End Cap....... 250mm
Width............ 550mm
Height.......... 75mm at max
Weight.......... 14kg
End Cap.........4 kg
|
SH75B
SH75Y
EC74B
|
Speed Hump Black
Speed Hump Yellow
End Cap Black
|
Road Spike 250
Screw Bolt 75
|
CODES
SH75B
SH 75Y
EC 75 B
|
|
|
|
|
Center sections fit together to span the width of any road.
Safe for emergency vehicles.
Encourages safe driving speeds.
Speedy modular assembly saves on labour.
Embedded reflective tape.
Flat top for safer walking surface.
Skid resistant surface.
High visibility.
Can withstand truck traffic.
Designed for high speed traffic volume.
This speed hump complies with the new
Australian / New Zealand standard
AS/NZS 2890.1:2004. |
Specifications
|
Part No. |
Style |
Length 500mm
End Cap 200mm
Length
Height 50mm
Width 900mm
Weight 17.0kg
End Cap 6.5kg weight
|
SCM
SCECR
SCECL
|
Speed Cushion
Module
Speed Cushion
End Cap Right
Speed Cushion
End Cap Left
|
Contact the sales team for your nearest distributor
|
|
©
2008-2010 North Pacific Supplies Pty Ltd. All rights reserved
|
